Kate and I had another fun crafty afternoon this week. We made fancy tap handles for my beer serving board.
We have the ability to have 4 different kegs of beer at home but were using little plastic “picnic” taps to serve the beer. It worked ok but didn’t look very pretty and definitely lacked the “cool” factor. Especially at parties. So we decided to see if we could come up with a way to make it a bit cooler
We had picked up some taps cheap on eBay, unfortunately though they didn’t come with handles and handles on their own can be quite expensive. So, we decided to make our own. The taps are chrome and have a screw in the top where you would normally screw the handle on which is also chrome. We decided to have some fun with this.
We got some big sturdy test tube type things on eBay and thought they would be cool tap handles as we could put things in them to customise them a bit. Oh the fun we could have.
We started by drilling a hole in the top of the cap so that the bolt on the tap could be fed through it and then we could use a nut on the other side to secure it. Trip to B&Q (an hour of looking at new bathrooms – as you do) and we were home with some washers and nuts.
Unfortunately we weren’t very careful at measuring so the washers were too big but the 3/8th inch nuts were perfect. I will add a washer to this at some point just to add a little more security and strength to the handle, as this is the piece that gets pulled on but for now they are working perfect as they are.
Once we had a way of attaching the handle to the tap it was time to decide on what to put into them. We could just put a piece of paper with the name of the beer, or even paint them but we had a bit more of a fun idea. We have filled them with different types of malted grains.
Malted grains are what beer is made from, well decent beer anyway, and different types of malt have different colours so we were able to make handles which had a mix of dark and light grains in them. Now we have functioning tap handles but they are also quite fitting showing off the raw ingredients of beer.
Now here is a tip for anyone who fancies trying this, you need to turn the handle full of your grain or other decorations upside down to get it onto the actual tap. I stuffed the top of mine with bubble wrap before doing this to stop the grains from falling out.
So there you go, our finished, fabulous tap handles complete with labels.